DPEC-H TYPE
It is used for cutting in milling machines, shapers, planers, and so on.
- Electricity and permanent magnet are used alternatively and electricity is only needed during ON/OFF, so absorption is done through the magnetic force of the permanent magnet when cutting.
- Electricity is only supplied momentarily at ON/OFF, thus no change in accuracy due to coil heating.
- Articles are absorbed by the magnetic force of the permanent magnet which does not require electricity, thus the power consumption is low and can be left for a long time in the adsorption state.
DPEC-H
OUTSIDE VIEW
STANDARD SPECIFICATIONS
| MODEL | DIMENSION (mm) | VOLTAGE (V) |
MASS (kg) |
||||||
|---|---|---|---|---|---|---|---|---|---|
| B*Le | B | Le | L | H | h | P | |||
| DPEC-2035H | 200*350 | 200 | 350 | 400 | 115 | 20 | 80 | DC220 | 35 |
| DPEC-2050H | 200*350 | 200 | 500 | 550 | 115 | 20 | 80 | 50 | |
| DPEC-3550H | 350*500 | 350 | 500 | 550 | 115 | 20 | 80 | 90 | |
| DPEC-3570H | 350*700 | 350 | 700 | 750 | 115 | 20 | 80 | 130 | |
| DPEC-5070H | 500*700 | 500 | 700 | 750 | 115 | 20 | 80 | 180 | |
| DPEC-5085H | 500*850 | 500 | 850 | 900 | 115 | 20 | 80 | 220 | |
| DPEC-50100H | 500*1000 | 500 | 1000 | 1050 | 115 | 20 | 80 | 260 | |